A
-
Abbasianjahromi, Hamidreza
A maturity evaluation model for implementing agile management in Iranian building companies with respect to identifications of its challenges [Volume 4, Issue 3, 2017, Pages 91-108]
-
Abdollahzadeh, Gholamreza
Connections rigidity effect on probability of fracture in steel moment frames [Volume 4, Issue 2, 2017, Pages 139-147]
-
Abedi, Jahangir
The effect of tectosilicates micronized additives on physical and mechanical properties improvements of Cob (Kahgel) plaster [Volume 4, Issue 1, 2017, Pages 63-80]
-
Afkhami, Vahid Reza
Nonlinear static analysis of steel frames with semi rigid beam to column connections using cruciform element [Volume 4, Issue 4, 2018, Pages 98-117]
-
Ahmadi, Hossein
The effect of tectosilicates micronized additives on physical and mechanical properties improvements of Cob (Kahgel) plaster [Volume 4, Issue 1, 2017, Pages 63-80]
-
Ahmadi Nedushan, Behrouz
Reliability-based topology optimization of bridge structures using first and second order reliability methods [Volume 4, Issue 1, 2017, Pages 5-18]
-
Akbari, Mahmood
Evaluation of mechanical properties of fiber reinforced recycled concrete: effect of size and amount of recycled aggregate, type and amount of fibers [Volume 4, Issue 1, 2017, Pages 138-150]
-
Akbari, Mahmood
Shear strength estimation of the concrete beams reinforced with FRP; comparison of artificial neural network and equations of regulations [Volume 4, Issue 4, 2018, Pages 79-97]
-
Amiri, Azadeh
Evaluation of the dynamic responses of high rise buildings with respect to the direct methods for soil-foundation-structure interaction effects and comparison with the approximate methods [Volume 4, Issue 2, 2017, Pages 106-122]
-
Amirshahkarami, Abdulazim
Experimental assessment and numerical modeling of the nonlinear behavior of the masonry shear walls under in-plane cyclic loading considering the brickwork-setting effect [Volume 4, Issue 2, 2017, Pages 19-32]
-
Azhdary Moghaddam, Mehdi
The effect of rebar coating types on bars corrosion of self-compacting concrete [Volume 4, Issue 4, 2018, Pages 172-185]
B
-
Babaeenezhad, Ali
Investigation of the behavior of connection of reduced-beam-section steel beam to reinforced concrete column [Volume 4, Issue 3, 2017, Pages 148-166]
-
Bagheri, Sina
Seismic response of cable stayed bridges under multi support excitation [Volume 4, Special Issue 1, 2017, Pages 58-69]
-
Barati, Mohammad
Estimating the behavior of RC beams strengthened with NSM system using artificial neural networks [Volume 4, Issue 4, 2018, Pages 16-28]
-
Barghian, Majid
A robust finite element model updating method for pier’s structure with uncertainties in connections using particle swarm optimization algorithm [Volume 4, Issue 1, 2017, Pages 19-32]
-
Barkhordari, Mohammad Sadegh
Base level Investigation in various buildings and corresponding effective factors [Volume 4, Special Issue 1, 2017, Pages 5-16]
-
Bater, Masoud
The effect of tectosilicates micronized additives on physical and mechanical properties improvements of Cob (Kahgel) plaster [Volume 4, Issue 1, 2017, Pages 63-80]
-
Bayat, Elyas
The structural response and manner of progressive collapse in RC buildings under the blast and Provide approaches to retrofitting columns against blast [Volume 4, Issue 1, 2017, Pages 81-100]
D
-
Dabbagh, Hooshang
Influence of fiber geometry on the mechanical properties of structural steel fiber lightweight concrete made with Scoria aggregate [Volume 4, Special Issue 1, 2017, Pages 17-25]
E
-
Ehsanifar, Mohammad
A maturity evaluation model for implementing agile management in Iranian building companies with respect to identifications of its challenges [Volume 4, Issue 3, 2017, Pages 91-108]
-
Eimani kalehsar, Houshyar
Parametric study of the along-wind and across-wind responses of tall RC chimneys using the frequency domain analysis [Volume 4, Issue 2, 2017, Pages 148-160]
-
Emadi, Rahmatoolah
The effect of tectosilicates micronized additives on physical and mechanical properties improvements of Cob (Kahgel) plaster [Volume 4, Issue 1, 2017, Pages 63-80]
-
Eslami, Abolfazl
Evaluation of bending moment and deflection of cantilever supported excavations [Volume 4, Issue 3, 2017, Pages 28-41]
-
Esmaeil Nia Omran, Mohammad
Estimation of RC columns’ response under the effect of lateral blast loading by SDOF method and comparison with FEM [Volume 4, Issue 3, 2017, Pages 81-90]
F
-
Fadavi Amiri, Mohammad Reza
Simulation of artificial earthquake records compatible with site specific response spectra using time series analysis [Volume 4, Issue 3, 2017, Pages 68-80]
G
-
Gerami, Mohsen
Evaluation of seismic reliability of steel moment resisting frames rehabilitated by concentric braces with probabilistic models [Volume 4, Issue 2, 2017, Pages 5-18]
-
Gerami, Mohsen
Evaluation of appropriate behavioral models for numerical simulation of new Cu based shape memory alloy [Volume 4, Issue 4, 2018, Pages 5-15]
-
Ghodrati Amiri, Gholamreza
Probabilistic seismic assessment of RC frame structures in North of Iran using fragility curves [Volume 4, Issue 4, 2018, Pages 58-78]
-
Gholhaki, Madjid
Investigate effects of the core distance from confining concrete on behavior of buckling restrained braces [Volume 4, Issue 1, 2017, Pages 51-62]
-
Gholhaki, Madjid
An experimental study on mechanical properties of concrete containing steel and polypropylene fibers at high temperatures [Volume 4, Issue 3, 2017, Pages 167-179]
-
Gholhaki, Madjid
An Experimental and Analytical Study on perpendicular to plane Flexural behavior of New Prefabricated Wall Made by Extruded Polystyrene [Volume 4, Special Issue 1, 2017, Pages 78-87]
-
Gholipour Feizi, Mehdi
A robust finite element model updating method for pier’s structure with uncertainties in connections using particle swarm optimization algorithm [Volume 4, Issue 1, 2017, Pages 19-32]
-
Golpayegani, Mahdi
The effect of moment redistribution on the stability of reinforced concrete moment resisting frame buildings under the ground motion [Volume 4, Issue 2, 2017, Pages 68-84]
H
-
Haghighat, Azadeh
Evaluation of new composite rigid joint under cyclic loading and its effect on one-floor composite frame [Volume 4, Issue 2, 2017, Pages 85-105]
-
Hasanpoor, Hamid
Simulation of artificial earthquake records compatible with site specific response spectra using time series analysis [Volume 4, Issue 3, 2017, Pages 68-80]
-
Havaei, GholamReza
The structural response and manner of progressive collapse in RC buildings under the blast and Provide approaches to retrofitting columns against blast [Volume 4, Issue 1, 2017, Pages 81-100]
-
Havaei, GholamReza
Numerical analysis of effective parameters in response of the nonlinear passive viscous systems [Volume 4, Special Issue 1, 2017, Pages 35-47]
-
Heisami, Alireza
Modeling impact damper in building frames using GAP element [Volume 4, Issue 1, 2017, Pages 113-125]
-
Heydarian, Neamat Allah
Evaluation of new composite rigid joint under cyclic loading and its effect on one-floor composite frame [Volume 4, Issue 2, 2017, Pages 85-105]
-
Hoseinzadeh, Yusef
Steel bridges structural health monitoring based on operational modal analysis accommodating evaluation of uncertainty [Volume 4, Issue 3, 2017, Pages 5-17]
-
Hosseini, Mahmood
Effect of soil-structure interaction on the seismic behaviour of pedestal-structure system in large dish antennas [Volume 4, Issue 4, 2018, Pages 118-135]
-
Hosseini Vaez, Seyed Rohollah
Estimating the behavior of RC beams strengthened with NSM system using artificial neural networks [Volume 4, Issue 4, 2018, Pages 16-28]
-
Hosseini Vaez, Seyed Rohollah
Evaluation equivalent pulse of pulse-like ground motion to estimate the response of RC moment-resisting frames [Volume 4, Issue 2, 2017, Pages 47-67]
-
Hoveidae, Nader
Investigation of the behavior of connection of reduced-beam-section steel beam to reinforced concrete column [Volume 4, Issue 3, 2017, Pages 148-166]
J
-
Jafari, Rahman
Evaluation of composite shear walls behavior (parametric study) [Volume 4, Issue 3, 2017, Pages 55-67]
-
Jafari Deligani, Vahid
Shear strength estimation of the concrete beams reinforced with FRP; comparison of artificial neural network and equations of regulations [Volume 4, Issue 4, 2018, Pages 79-97]
-
Jahan, Saeid
Steel bridges structural health monitoring based on operational modal analysis accommodating evaluation of uncertainty [Volume 4, Issue 3, 2017, Pages 5-17]
-
Jahan Abadi, Mojtaba
Evaluation equivalent pulse of pulse-like ground motion to estimate the response of RC moment-resisting frames [Volume 4, Issue 2, 2017, Pages 47-67]
-
Jamali Far, Amin
Investigate effects of the core distance from confining concrete on behavior of buckling restrained braces [Volume 4, Issue 1, 2017, Pages 51-62]
-
Jamshidiha, Hamid Reza
Selection of appropriate intensity measure for collapse capacity prediction of low to mid-rise steel special moment resisting frames [Volume 4, Special Issue 1, 2017, Pages 98-109]
-
Johari, Meysam
Reliability-based topology optimization of bridge structures using first and second order reliability methods [Volume 4, Issue 1, 2017, Pages 5-18]
K
-
Kamali, Mohammad Taher
Nonlinear static analysis of steel frames with semi rigid beam to column connections using cruciform element [Volume 4, Issue 4, 2018, Pages 98-117]
-
Karamodin, Abbas
Probabilistic assessment of steel moment frames incremental collapse (ordinary, intermediate and special) under earthquake [Volume 4, Issue 3, 2017, Pages 129-147]
-
Karimi, Amir Hossein
Experimental assessment and numerical modeling of the nonlinear behavior of the masonry shear walls under in-plane cyclic loading considering the brickwork-setting effect [Volume 4, Issue 2, 2017, Pages 19-32]
-
Karimi, Mohammad Saeed
Experimental assessment and numerical modeling of the nonlinear behavior of the masonry shear walls under in-plane cyclic loading considering the brickwork-setting effect [Volume 4, Issue 2, 2017, Pages 19-32]
-
Keykha, Amir Hamzeh
Effect of CFRP location on flexural and axial behavior of SHS steel columns strengthened using CFRP [Volume 4, Issue 2, 2017, Pages 33-46]
-
Keyvani, Abdullah
Investigation of the behavior of connection of reduced-beam-section steel beam to reinforced concrete column [Volume 4, Issue 3, 2017, Pages 148-166]
-
Keyvani Ghamsari, J.
Seismic performance of high rise hybrid structures with moment frame configuration [Volume 4, Special Issue 1, 2017, Pages 88-97]
-
Khademalrasoul, Abdolghafour
Linear and curvature internal heterogeneous boundaries influences on mixed mode crack propagation using level set method [Volume 4, Issue 3, 2017, Pages 42-54]
-
Khalili, Saman
Seismic performance of high rise hybrid structures with moment frame configuration [Volume 4, Special Issue 1, 2017, Pages 88-97]
-
Khanjani, Farshid
Evaluation of seismic performance of X bracing systems equipped with flexural yielding dampers [Volume 4, Issue 2, 2017, Pages 123-138]
-
Khazaei, Jahangir
Evaluation of the dynamic responses of high rise buildings with respect to the direct methods for soil-foundation-structure interaction effects and comparison with the approximate methods [Volume 4, Issue 2, 2017, Pages 106-122]
-
Kheyroddin, Ali
Experimental assessment and numerical modeling of the nonlinear behavior of the masonry shear walls under in-plane cyclic loading considering the brickwork-setting effect [Volume 4, Issue 2, 2017, Pages 19-32]
-
Khidaie, Nahmat
Parametric study of the along-wind and across-wind responses of tall RC chimneys using the frequency domain analysis [Volume 4, Issue 2, 2017, Pages 148-160]
-
Khodayari, Elaheh
A maturity evaluation model for implementing agile management in Iranian building companies with respect to identifications of its challenges [Volume 4, Issue 3, 2017, Pages 91-108]
-
Khoshnoudian, Faramarz
Seismic behavior of asymmetric structures supported on TCFP bearings subjected to simplified near-fault pulses [Volume 4, Special Issue 1, 2017, Pages 48-57]
-
Khosravi, Amir Esmaeel
The behavior of the composite multi-layer cylindrical shells subjected to blast load [Volume 4, Special Issue 1, 2017, Pages 26-34]
M
-
Madani, Saeed
Study of failure mechanism of double-lap joints of steel to FRP by bolt and resin [Volume 4, Issue 1, 2017, Pages 126-137]
-
Mahboubi, Shima
Study on seismic behaviour of integral concrete bridges with different skew angles through fragility curves [Volume 4, Issue 4, 2018, Pages 155-171]
-
Mahmoudi Sahebi, Mussa
Evaluation of seismic performance of X bracing systems equipped with flexural yielding dampers [Volume 4, Issue 2, 2017, Pages 123-138]
-
Mahmoudzadeh, Amir
Effect of soil-structure interaction on the seismic behaviour of pedestal-structure system in large dish antennas [Volume 4, Issue 4, 2018, Pages 118-135]
-
Mehdizadeh, Kourosh
Probabilistic assessment of steel moment frames incremental collapse (ordinary, intermediate and special) under earthquake [Volume 4, Issue 3, 2017, Pages 129-147]
-
Meshkat-Dini, Afshin
Seismic performance of high rise hybrid structures with moment frame configuration [Volume 4, Special Issue 1, 2017, Pages 88-97]
-
Miri, Mahmoud
The effect of rebar coating types on bars corrosion of self-compacting concrete [Volume 4, Issue 4, 2018, Pages 172-185]
-
Mirzahosseini, Mehrsa
Evaluation of appropriate behavioral models for numerical simulation of new Cu based shape memory alloy [Volume 4, Issue 4, 2018, Pages 5-15]
-
Mohammaddoost, Hooman
Influence of fiber geometry on the mechanical properties of structural steel fiber lightweight concrete made with Scoria aggregate [Volume 4, Special Issue 1, 2017, Pages 17-25]
-
Mohebi, Benyamin
Selection of appropriate intensity measure for collapse capacity prediction of low to mid-rise steel special moment resisting frames [Volume 4, Special Issue 1, 2017, Pages 98-109]
-
Mojtahedi, Alireza
A robust finite element model updating method for pier’s structure with uncertainties in connections using particle swarm optimization algorithm [Volume 4, Issue 1, 2017, Pages 19-32]
-
Mojtahedi, Alireza
Steel bridges structural health monitoring based on operational modal analysis accommodating evaluation of uncertainty [Volume 4, Issue 3, 2017, Pages 5-17]
-
Mollaei, Somayeh
Estimation of RC columns’ response under the effect of lateral blast loading by SDOF method and comparison with FEM [Volume 4, Issue 3, 2017, Pages 81-90]
-
Mortezaei, Alireza
The effect of moment redistribution on the stability of reinforced concrete moment resisting frame buildings under the ground motion [Volume 4, Issue 2, 2017, Pages 68-84]
N
-
Naderpour, Hosein
Evaluation of seismic reliability of steel moment resisting frames rehabilitated by concentric braces with probabilistic models [Volume 4, Issue 2, 2017, Pages 5-18]
-
Naderpour, Hosein
Estimating the behavior of RC beams strengthened with NSM system using artificial neural networks [Volume 4, Issue 4, 2018, Pages 16-28]
-
Naghipour, Morteza
Improving the seismic performance of eccentrically braced frames by using a ductile element [Volume 4, Issue 3, 2017, Pages 18-27]
-
Naseri, Ali
Probabilistic seismic assessment of RC frame structures in North of Iran using fragility curves [Volume 4, Issue 4, 2018, Pages 58-78]
-
Nezaminia, Hamid
Shear strength estimation of the concrete beams reinforced with FRP; comparison of artificial neural network and equations of regulations [Volume 4, Issue 4, 2018, Pages 79-97]
-
Nikkhoo, Ali
Evaluation of composite shear walls behavior (parametric study) [Volume 4, Issue 3, 2017, Pages 55-67]
-
Nourani, Vahid
A robust finite element model updating method for pier’s structure with uncertainties in connections using particle swarm optimization algorithm [Volume 4, Issue 1, 2017, Pages 19-32]
-
Nouri, Younes
The behavior of the composite multi-layer cylindrical shells subjected to blast load [Volume 4, Special Issue 1, 2017, Pages 26-34]
O
-
Omidian, Pedram
Study on seismic behaviour of integral concrete bridges with different skew angles through fragility curves [Volume 4, Issue 4, 2018, Pages 155-171]
P
-
Pachideh, Ghasem
An experimental study on mechanical properties of concrete containing steel and polypropylene fibers at high temperatures [Volume 4, Issue 3, 2017, Pages 167-179]
-
Pahlavan, Hossein
Probabilistic seismic assessment of RC frame structures in North of Iran using fragility curves [Volume 4, Issue 4, 2018, Pages 58-78]
-
Parvanehro, Parsa
Seismic response of cable stayed bridges under multi support excitation [Volume 4, Special Issue 1, 2017, Pages 58-69]
-
Pouladvand, Mohammad Hossein
Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults [Volume 4, Issue 3, 2017, Pages 109-128]
-
Pourhatami, Bahador
Effect of soil-structure interaction on the seismic behaviour of pedestal-structure system in large dish antennas [Volume 4, Issue 4, 2018, Pages 118-135]
R
-
Rahnavard, Rohola
Function comparison between moment frame and moment frame with centrically braces in high-rise steel structure under the effect of progressive collapse [Volume 4, Issue 4, 2018, Pages 42-57]
-
Ranjbargol, Mehdi
Evaluation of composite shear walls behavior (parametric study) [Volume 4, Issue 3, 2017, Pages 55-67]
-
Rezaei, Fateme
Evaluation of seismic reliability of steel moment resisting frames rehabilitated by concentric braces with probabilistic models [Volume 4, Issue 2, 2017, Pages 5-18]
-
Rezaeian, Abbas
Response of steel box columns in fire conditions [Volume 4, Issue 1, 2017, Pages 101-112]
-
Rezaei Far, Omid
Investigate effects of the core distance from confining concrete on behavior of buckling restrained braces [Volume 4, Issue 1, 2017, Pages 51-62]
-
Rezayfar, Omid
An experimental study on mechanical properties of concrete containing steel and polypropylene fibers at high temperatures [Volume 4, Issue 3, 2017, Pages 167-179]
-
Rezayfar, Omid
An Experimental and Analytical Study on perpendicular to plane Flexural behavior of New Prefabricated Wall Made by Extruded Polystyrene [Volume 4, Special Issue 1, 2017, Pages 78-87]
-
Rigi, Mohsen
The effect of rebar coating types on bars corrosion of self-compacting concrete [Volume 4, Issue 4, 2018, Pages 172-185]
-
Rostami, Roohallah
Effects of Calcined clay minerals and Silica fume on the compressive strength of concrete [Volume 4, Issue 1, 2017, Pages 33-50]
S
-
Sadeghi, Siavash
Investigation of R-Factor for steel moment frame combined with cold-formed steel structures under different load patterns using pushover analysis [Volume 4, Issue 2, 2017, Pages 161-172]
-
Sademomtazi, Ali
Assessment of aggregates- cement paste border in concretes containing silica fume and fly ash [Volume 4, Issue 4, 2018, Pages 136-154]
-
Safaeian, Mahdi
Response of steel box columns in fire conditions [Volume 4, Issue 1, 2017, Pages 101-112]
-
Saffari, Hamid
Seismic Microzonation of Tehran based on deterministic seismic hazard analysis and seismic indexes around faults [Volume 4, Issue 3, 2017, Pages 109-128]
-
Saidie, Seyed Murtaza
An Experimental and Analytical Study on perpendicular to plane Flexural behavior of New Prefabricated Wall Made by Extruded Polystyrene [Volume 4, Special Issue 1, 2017, Pages 78-87]
-
Sajedi, Fathollah
Technical note: Analysis of claims and disputes in contracts for oil and gas development projects in Iran with solutions [Volume 4, Issue 2, 2017, Pages 173-192]
-
Salim Bahrami, Seyed Reza
Improving the seismic performance of eccentrically braced frames by using a ductile element [Volume 4, Issue 3, 2017, Pages 18-27]
-
Sarmast Shoushtari, Farrokh
Technical note: Analysis of claims and disputes in contracts for oil and gas development projects in Iran with solutions [Volume 4, Issue 2, 2017, Pages 173-192]
-
Sepehr Moosavi, Seyed Vahid
Base level Investigation in various buildings and corresponding effective factors [Volume 4, Special Issue 1, 2017, Pages 5-16]
-
Shabanzadeh, Ehsan
Connections rigidity effect on probability of fracture in steel moment frames [Volume 4, Issue 2, 2017, Pages 139-147]
-
Shahabian, Farzad
The behavior of the composite multi-layer cylindrical shells subjected to blast load [Volume 4, Special Issue 1, 2017, Pages 26-34]
-
Shamekhi Amiri, Mohammad
Simulation of artificial earthquake records compatible with site specific response spectra using time series analysis [Volume 4, Issue 3, 2017, Pages 68-80]
-
Sharbatdar, Mohammad Kazem
Evaluation of new composite rigid joint under cyclic loading and its effect on one-floor composite frame [Volume 4, Issue 2, 2017, Pages 85-105]
-
Shariatmadar, Hashem
Technical note: Risk detection in light steel frame buildings in design, construction and implementation phases [Volume 4, Issue 4, 2018, Pages 186-200]
-
Shirani Bid Abadi, Mehran
Evaluation of mechanical properties of fiber reinforced recycled concrete: effect of size and amount of recycled aggregate, type and amount of fibers [Volume 4, Issue 1, 2017, Pages 138-150]
-
Siahpolo, Navid
Function comparison between moment frame and moment frame with centrically braces in high-rise steel structure under the effect of progressive collapse [Volume 4, Issue 4, 2018, Pages 42-57]
-
Soleymani Eyvari, Sayed Ali
Simulation of artificial earthquake records compatible with site specific response spectra using time series analysis [Volume 4, Issue 3, 2017, Pages 68-80]
-
Soltani, Abolfazl
Effects of Calcined clay minerals and Silica fume on the compressive strength of concrete [Volume 4, Issue 1, 2017, Pages 33-50]
T
-
Tahmouresi, Behzad
Assessment of aggregates- cement paste border in concretes containing silica fume and fly ash [Volume 4, Issue 4, 2018, Pages 136-154]
-
Tajammolian, Hamed
Seismic behavior of asymmetric structures supported on TCFP bearings subjected to simplified near-fault pulses [Volume 4, Special Issue 1, 2017, Pages 48-57]
-
Tarighat, Amir
Effects of Calcined clay minerals and Silica fume on the compressive strength of concrete [Volume 4, Issue 1, 2017, Pages 33-50]
-
Tehranizadeh, Mohsen
Base level Investigation in various buildings and corresponding effective factors [Volume 4, Special Issue 1, 2017, Pages 5-16]
V
-
Vatani Oskoei, Asghar
Study of failure mechanism of double-lap joints of steel to FRP by bolt and resin [Volume 4, Issue 1, 2017, Pages 126-137]
Y
-
Yahyai, Mahmood
Response of steel box columns in fire conditions [Volume 4, Issue 1, 2017, Pages 101-112]
-
Yakhchalian, Mansoor
Selection of appropriate intensity measure for collapse capacity prediction of low to mid-rise steel special moment resisting frames [Volume 4, Special Issue 1, 2017, Pages 98-109]
-
Yasrebi, Seyed Hamid
Evaluation of bending moment and deflection of cantilever supported excavations [Volume 4, Issue 3, 2017, Pages 28-41]
-
Yeganeh, Ali
Technical note: Risk detection in light steel frame buildings in design, construction and implementation phases [Volume 4, Issue 4, 2018, Pages 186-200]
Z
-
Zahrai, Seyed Mehdi
Modeling impact damper in building frames using GAP element [Volume 4, Issue 1, 2017, Pages 113-125]
-
Zakeri, Amir Hossein
Study of failure mechanism of double-lap joints of steel to FRP by bolt and resin [Volume 4, Issue 1, 2017, Pages 126-137]
-
Zamani, M.
Structural behaviour of concrete poles used in electric's power distribution network [Volume 4, Issue 4, 2018, Pages 29-41]
-
Zare, Alireza
Numerical analysis of effective parameters in response of the nonlinear passive viscous systems [Volume 4, Special Issue 1, 2017, Pages 35-47]
-
Zeynalian, Mehran
Structural behaviour of concrete poles used in electric's power distribution network [Volume 4, Issue 4, 2018, Pages 29-41]
-
Zeynalian, Mehran
Investigation of R-Factor for steel moment frame combined with cold-formed steel structures under different load patterns using pushover analysis [Volume 4, Issue 2, 2017, Pages 161-172]
Your query does not match with any item